Product Description
Part Filll valves are intended for use in water storage and rainwater harvesting tanks. The purpose of the float valve is to automatically maintain a low or minimum level of water in the tank during periods of high usage or low rainfall.
How it works
The valve is installed through the side wall of a storage tank. It should be mounted above the overflow level of the tank to prevent backflow.As the tank empties the weighted float travels down the cord and sits on the bottom stop to activate the valve.The valve will run until the weighted float lifts clear of the bottom stop.The float will then rise as rainwater fills the tank and falls as the tank water is used.The valve will only function at times when rain fall is insufficient to maintain a water level in the tank above the bottom stop.The use of a flow restrictor before the valve will not cause the valve to malfunction.FeaturesIdeal for use with all makes and models of rain water harvesting tanksCompact in design Constructed from robust non corroding materials
Built ion non return valveValve can be locked in the off position using the lock off switchUp to 150mm water level differential obtainable (dependant opn pressure)Easy to install and serviceDownloads
