525 Litre Rainwater Harvesting System Sandstone

---

Description

---

About Product

Made from virgin polymer

Approximate wall thickness: 6-7mm

Fully removable lid as standard

¾" raised brass threaded outlet

2 x 1" brass threaded outlets - one on each side

Water butt benefits

Suitable for internal and external use

Frost proof; will not crack in the cold

Modern, minimalist pillar design

Tall, slim tank maximises capacity when space is limited

Tanks can be connected together using bottom outlets

Opaque plastic reduces algae growth in sunlight

Rotationally moulded for strength and durability

2 year warranty against manufacturing defects

800 Litre water butt details

Height	1100mm
Length	840mm
Width	650mm
Front Outlet	1" & 1x ¾ BSP
Weight	22kg
Capacity	525 litres / 115 gal
Access	Lift-off lid
Material	MDPE

Pump details

Dimensions	L:565mm x W:185mm x H:260mm
Weight	13.1 kg
Max head (nominal)	35mm
Pump pressure (nominal)	3.5 Bar
Guarantee	2 Years
Max Suction	3 Metres

Water pump
The HydroForce Series 3 is an electronically-controlled, pressure-sensitive, submersible, centrifugal roto-dynamic pump with no reciprocating parts. Max head (nominal) 35 metres, pump pressure (nominal) at outlet 3.5 bar, max suction 3 metres

Downpipe filter diverter Diverter & Filter in Black collects and filters rainwater before it enters your water butt or tank. An ideal filtration solution. Recycle rainwater straight from your downpipe. The standard length of hose in box is 500mm

.Rainwater pipeThis system comes with 25m of 25mm Rainwater Harvesting Pipe. This pipe can be easily identified be the Green strip running down Black pipe. This pipe must be used under the Water Regulations.

---

Downloads

---